Hello from GeorgeBoards – we have expanded out parts catalog for the DIY Builders.
EMAIL for Details and Pricing for your project, Combined shipping – custom logos – branding , endless possibilities.
We now have Head Stock Router Templates for 6-8-10-12 Strings.
6 -String Head Stock Router Template = $25.00 usd + Shipping
8 -String Head Stock Router Template = $25.00 usd + Shipping
10 String Head Stock Router Template = $35.00 usd + Shipping
12 String Head Stock Router Template = $40.00 usd + Shipping
Our Acrylic with Brass Insert Nut and Bridge Units are available in 6-8-10-12 String sizes.
6 -String Nut and Bridge = $60.00 usd + Shipping
8 -String Nut and Bridge = $60.00 usd + Shipping
10 String Nut and Bridge = $70.00 usd + Shipping
12 String Nut and Bridge = $70.00 usd + Shipping
We are making Lexan Non Glare FretBoards in numerous custom sizes. Typically $35.00 for a custom order includes shipping USA — Custom Graphics – Extra.
I’ve been making some for pedal steels that are having Glare issues that drop on over the aluminum silk-screened that typically come installed on various models of Pedal Steels.
These have compensated distance from Zero to fret one to accommodate the roller nut width.
Shown is a Lexan Non Glare Fretboard I am making to replace the Laser Etched Plexi ones on our original GeorgeBoard guitars.
It is compensated for the wide nut holder unit.
Hello from GeorgeBoards – Here is our Latest Addition to our Parts Catalog. Veneer KITS.
I’ve created a way to have Exotic Wood on our S8 Console with penny’s on the Dollar expense output.
All you need is some time and desire to be careful – we have done all of the hard parts for you with CNC and Laser exacting precision.
The Veneer is available in numerous Wood Species, the below photos are of KOA over Poplar Wood, we can get Flamed Tiger Maple for example.
It took me about 8 hours to glue the .020 thickness solid wood Veneer on, including simple heat bending at the head stock area with a Hair Dryer and Q-Tip water.
All of the Veneer is pre cut on the Laser to drop right on the blank with minimal sanding.
TightBond III was used for most of the gluing and a little bit of 5 minute Epoxy.
The Side Bands are pre cut with the Laser , it requires simple sanding to smooth out the long cut before you glue it on.
After Getting every thing glued on I apply Epoxy Thinned with Denatured Alcohol to seal – grain fill and lightly darken.
4 Coats of CAB Acrylic Lacquer with light Steel Wool between Coats.
Hello from GeorgeBoards These are Alder Wood Body Blanks for the Build Your Own Do It Yourself folks.
These have a 1.75 X 4 inch pickup pocket, that will house numerous types of pickups.
WE sell a wide variety of Tuners – Jack – Pick-ups – Hardware – Separately.
The Alder is a nice looking and easy to work wood that was used in a lot of original fender instruments.
The 1st One is already Finished with Clear CAB Acrylic Lacquer. $300.00 usd + Shipping
The 2 RAW ones are already rough Sanded, Have the Tuner Holes pre drilled , – the Out-Put Jack hole drilled and countersunk. $200.00 usd each + Shipping.
All Three Body Blanks have 3 Socket Holes pre drilled on ther bottom sides.
Hello from GeorgeBoards we are selling this as a KIT Form. SOLD
The Kit includes:
CNC Routed AAA Clear Poplar Wood Body, with a pocket for dual stringmaster style pickups, control pocket. 36.5 Long 5.5 Wide 1.75 Thick. Set Up for 24.5 scales.
Metallic Black with Clear Coats. 3 Leg Socket Holes Pre Drilled (Sockets not included in this price sold separately).+ a Veneer of the KOA in the Head Stock.
Heavy Duty Tuner Keys – Installed
White-Black-White Pickguard material bonded to KOA Veneer plates for both pickups and controls — hold down screws for the plates.
I’ve pre drilled the hole for the pickup wires to the control pocket.
250k Volume, 250k Blend, 1 Meg Tone controls, orange drop capacitor, Output Jack Installed, Tele Style Knobs — Dome Blend Knob — Both Cambers and plates are painted with shielding.
Hand Formed Nickel Plated Brass Angle 1/8″ thick for your nut and bridge. I will pre install them @ 24.5 scale.
I’ve done all of the hardest parts for you , and now some simple drills and assembly — soon your new Single 8 String Console will be ready to play music.
We sell separately : Vintage Spec. Pickups – Fretboards – Strings – Top Ferrules – Assembly Labor – More
Angle Brass 7 inches long. 1/2 x 1/2 x 1/8 Thickness 10.00 + shipping included in the payment options listed below.
Lowest Cost to you — Simply cut to your lengths for both Nut and Bridge
Clean Up with a file and Steel Wool or 1000 git sand paper. This material is easy to drill holes for hold down screws and to add V Grooves for your strings as you choose your spacing. Our String Spacing fixture shown below makes this very easy and accurate.
Team this angle with our peel n stick fretboards that all have thin lines for exact placement of Nut and Bridge for instant lap steel guitar on any plank of wood or other material. No need for measuring tapes or rulers.
Brass Angle with USA Shipping 14.00 total
Brass Angle with International Shipping 24.00 total
International: Click “Shipping Options” To Avoid Delay or Cancel
#1. HeadStock Router Jig for an 8 String – 1/4″ thick Acrylic Laser Cut CNC Jig.
Use 2 sided tape to press it down , and go at it with your Trim Router and a Follow Pattern Bit.
This is the same Engineered Head Stock Shape we use on out Non Peal Steels,
it is designed for Nearly Straight Pulls from your nut to Tuner Peg Poles.
$31.00 usd includes shipping Worldwide.
#2. Nut-Bridge Grooves Fixture – Very Cool Helper made of durable flexible polycarbonate.
3/8″ and 11/32″ Spacing Laser Etched Slots for Marking your Nut and Bridges for Grooves.
This Great Tool will take a lot of guess work and frustration out of your future builds.
Simply hold or tape this to your nut or bridge and mark with a pencil or a scribe for Quick and Accurate String Spacing.
$12.00 usd includes shipping Worldwide.
#3. Router Template for Dual 8 Pole StringMaster Style PickUp Pocket on your DIY Build.
1/4″ thick clear plexi 8X6 outer dimensions with a 4.25″ X 2.50″ Pocket Size.
2 side tape it down and use your trim router with a pattern follow bit to create a pocket
for a set of 8 pole Stringmaster type Pickups in the Face of your DIY Build.
$31.00 usd includes shipping Worldwide.
#4. Pick Guards Fitted for Dual 8 Pole String Master Style Pickups, This one pictured is a Clear Proto-type, we will have these in Typical Pick Guard Material, numerous Color Choices.
We will sell these Blank with no Pickups and we will sell these pre-fitted with our New StringMaster Style Retro S8 Vintage Alnico5 wound to original specs.
The pickup magnets are aligned 1.5″ from each other, the pick-guard will fit our router template listed above, these will mount on your DIY Build so the bridge pickup is 1″ from your bridge, same as the way original String Master Fender Steels were set up.